1. PACKED COLUMN INTERNALS

1. STRUCTURED PACKING

EMGrids are developed for severe services that are susceptible to fouling, erosion …

EMPACK structure packing are characterized by high performance and a flexible application concept…

High capacity packing are structure packing with higher capacity and mass transfer rate…

2. RANDOM PACKING

ESP-I-RING packing is applicable in as broad range of services as any mass transfer device…

ESP-P-Ring packing has the advantages of large flux, low resistance, high separation efficiency and large operating flexibility…

Plastic packing are used in corrosive applications with low to moderate operating temperature…

2. SEPARATOR INTERNALS

1. MIST ELIMINATOR

Chevron packs are vane-type separators of high-speed droplets. When they are properly designed they can be very effective in collecting droplets of < 10 microns in diameter…

The most common mist eliminator used in production is the knitted-wire-mesh type. The mesh mist eliminators include a pad of knitted wire mesh packed between two rigid grids to provide support…                                                                                                                 

2. INLET Device

The purpose of a Vane Inlet Device (VID) is to decrease the momentum of the feed, perform a first stage separation of solids and liquid from the vapor, and achieve an even vapor distribution across the vessel cross section…

3.Filtration

Our production capabilities enable this metallic structure to be manufactured in form of a single piece constructed cylinder…

Nozzle filters are devices used where distributed filtration is needed and there is no need to use long cartridges which causes waste of vessel capacity…